%20scale(3)'%3E%3Cpath%20id='s'%20d='M0,-30%2017.63355,24.27051%20-28.53171,-9.27051H28.53171L-17.63355,24.27051z'%20fill='%23FF0'/%3E%3C/g%3E%3Cuse%20xlink:href='%23s'%20transform='translate(300,60)%20rotate(23.036243)'/%3E%3Cuse%20xlink:href='%23s'%20transform='translate(360,120)%20rotate(45.869898)'/%3E%3Cuse%20xlink:href='%23s'%20transform='translate(360,210)%20rotate(69.945396)'/%3E%3Cuse%20xlink:href='%23s'%20transform='translate(300,270)%20rotate(20.659808)'/%3E%3C/svg%3E){kind=small}
Поиск по актуальным вакансиям:
Показать фильтры
Поиск резюме моряков:общая базамоя база
Главная Онлайн-тесты CES Medium Speed 3rd-Eng/4rd-Eng Test online for seafarers working in Engine Room (Operational, Medium Speed) (CES v6.0)
Онлайн-тестирование: Test online for seafarers working in Engine Room (Operational, Medium Speed) (CES v6.0)
Выберите режим работы с тестом:
Обучение
Онлайн-тест
Описание
Отзывы
Тест состоит из 80 случайных вопросов.
Всего вопросов по данной теме: 120
Всего вопросов по данной теме: 120
Вопрос 1 из 80
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
What action should be taken if it is noticed that there is a quantity of oil on the engine room tank top?
Start the fire pump and wash the oil into the bilges.
Open the overboard valve and start the bilge pump.
Apply foam to the tank top to minimise any risk of fire.
Notify the duty engineer and try and find the cause of the leakage so that it can be stopped and the oil cleaned up.
Which cleaning agents are suitable for use in machinery space when considering the effect on the function of the oily water separator?
Only non-emulsifying cleaning agents with self-splitting emulsifiers are suitable.
None should be used as all cleaning agents affect the function of an OWS.
Any kind of cleaning agent is suitable.
An emulsification type cleaning agent is suitable.
What is generally considered as the minimum safe time period before opening a crankcase door after the oil mist detector alarm has activated and the engine has been stopped?
After at least 20 minutes.
After at least 10 minutes.
After at least 5 minutes.
After at least 1 hour.
What would be the most probable cause of high temperature readings for the bearings in a diesel engine?
Lubricating oil pressure too low.
Charge air pressure too low.
Jacket cooling water temperature too high.
Water in the fuel oil.
When operating a propulsion installation consisting of medium speed diesel engines driving a controllable pitch propeller it is possible to operate the combination of engine speed and propeller pitch in a number of different ways. What would be the main reason for operating with constant speed and variable pitch?
To allow the engine to be operated with a load sensing governor instead of a speed sensing governor.
To allow rapid load change and thrust reversal when manoeuvring.
To obtain maximum propeller efficiency over the load range of the engine.
To allow constant speed operation of a shaft generator while the engine load changes with pitch variation.
With reference to the efficiency of cargo pumps on oil tankers, the abbreviation NPSH stands for:
Necessary Pumping Suction Hazard.
Natural Pumping Standard Height.
Nominal Pressure Suction Head.
Net Pressure Suction Head.
Is there any special area where it is forbidden to pump out any sludge or oil residues?
There are 8 special area where it is forbidden to pump out any sludge or oil residues.
There are 9 special area where it is forbidden to pump out any sludge or oil residues.
There are 4 special area the Baltic, Mediterranean, Red sea and Black sea where it is forbidden to pump out any sludge or oil residues.
There isn’t any special area where it is forbidden to pump out any sludge or oil residues.
Which of the following answers would most appropriately describe shell plating damage to the vessel?
My vessel has sustained damage to shell plating below the waterline.
My vessel has sustained damage to shell plating below the waterline in way of No. 3 cargo hold, starboard side.
My vessel has sustained damage to shell plating in way of No. 3 cargo hold.
My vessel has sustained damage to shell plating above the waterline.
An airway should be used when:
The patient has stopped breathing.
The patient is unconscious.
The patient is breathing on his own but is doing so with great difficulty.
Patient has injury in the mouth.
What type of fire integrity must be provided for an engine control room?
C.
A 0.
A 60.
B 15.
What types of fire extinguishers shall be used in the engine room?
Fire extinguishers of the handy-size types only.
Fire extinguishers filled with fresh water only.
Fire extinguishers equipped for powder or CO2 only.
Any fire extinguisher with a weight of less than 100 lbs.
The ship is involved in a collision, what is the immediate action by the Officer of the Watch after the incident has taken place?
Sound the General Alarm and stop engines.
Contact the other ship and send the bridge lookout down to start taking soundings.
Call the Master and check the position for any immediate dangers.
Stop engines and check over the side for any signs of pollution.
The following information must be given on the SART:
The MMSI number sent.
The date of replacement of the hydrostatic release unit.
The name of the operator.
Date of replacement of the batteries.
Which of the following disposal would be permitted?
Food waste from a vessel outside a special area and 12 miles from nearest land.
Paper products from a vessel inside a special area and 15 miles from the nearest land.
Food waste from a vessel outside a special area and 10 miles from the nearest land.
Food waste from a vessel inside a special area and 10 miles from nearest land.
What is the correct name of the equipment shown in the sketch?
File.
Shaping machine.
Pedestal drill.
Chisel.
Where would you find out which fire sections are enclosed by “A” or “B” class divisions on a ship?
On the ship’s fire control plans.
On the general arrangement plan.
All the mentioned alternatives.
On the capacity plan.
When cargo discharge reaches stripping levels on an oil tanker, it is necessary to reduce the inert gas pressure so as to:
Comply with the requirement of MARPOL Annex VI.
Avoid locking the cargo pump impeller.
Minimise blowback.
Avoid over-capacity in the IG generator.
Give the meaning of the following symbol:
CO2 battery.
Remote controlled fire pumps.
Foam release station.
International shore connection.
While getting tools ready and preparing for overhaul work on the main engine the engine room rating notices that the electrical extension is damaged. A small section of the cables outer insulation is split although the inner insulation appears ok. What action should the rating take?
Cut off the end of the cable including the damaged section and refit the plug to the end of the remaining cable before using the extension.
Label the damaged extension as unfit for use and return it to the store for testing and get a replacement extension.
Carry on using the extension after wrapping insulation tape over the damaged section as it is only minor damage.
Just use the extension as it is since the damage is only to the outer insulation and the inner insulation appears ok.
The normal carbon content of Crude Oil is in the range of:
83-87 %.
88-94 %.
62-73 %.
24-82 %.
Shipboard Emergency Drills must be carried out at least (OPA-90):
Once a month.
Once every 6 months.
Once a week.
Once a year.
How many thermal protective aids are carried in each liferaft?
Nil.
10 % of the number of persons the liferaft is designed to carry, or two, whichever is more.
The number of persons the liferaft is permitted to accommodate.
6.
An engine room rating is given the task of retightening the flanges of a pipe that has been replaced in the engine room. Which of the following tightening procedures should be followed?
Gradually tighten all of the bolts working diagonally across and around the flange.
Start with the top bolt and fully tighten each in turn moving clockwise around the flange.
Start with the bottom bolt and partially tighten each bolt in turn working counter clockwise around the flange. Repeat to fully tighten.
Fully tighten each bolt in turn and work diagonally across and around the flanges.
On a fire patrol at night you see smoke coming from a closed cabin door. What action should you take first?
Activate the nearest fire alarm button and advise bridge of the location of the fire.
Get the nearest fire extinguisher and then open the door to see what the situation is.
Take a look inside the cabin to see what the situation is.
As most people are sleeping, call a friend and ask him to assist in putting out the fire.
An engine room rating notices that the guard on a running pump is hanging loose due to a missing bolt on the support bracket and it is catching the shaft coupling. What is the best action to take as a repair method?
Try and fit a new bolt while the pump is running to permanently fix the guard in place.
Inform the watchkeeper so that the pump can be stopped and a new bolt can be fitted to permanently fix the guard in place.
Fasten the guard back in place with a piece of rope with the pump running as a temporary repair.
Place a sheet of metal in front of the guard to deflect any parts that may fly off as a temporary repair.
What term is used to describe a fresh water cooling system which contains a seawater cooled common freshwater cooler and which meets the cooling requirements for all the engine room machinery?
A high temperature freshwater system.
A common cooling system.
A central cooling system.
A low temperature freshwater system.
What is the first action that should be taken by the rating on boiler watch in the event of a flame failure on the boiler?
Call the engineer on watch.
Stop the feed water pump.
Notify the bridge.
Call the chief engineer.
What is the emergency channel on VHF?
Channel 09.
Channel 16.
Channel 69.
Channel 21.
Why is it important that the combustion chamber of a boiler is properly ventilated prior to ignition?
To avoid an explosion in case any oil vapours are present from oil leakage into the furnace.
To ensure that there is sufficient air for proper combustion.
To remove any deposits from the furnace wall.
To cool the surfaces of the boiler furnace in case they give premature ignition of the burner.
What kind of extinguishing-remedy would you choose to put out an electrical fire?
Combination of powder and water.
Water.
Foam.
Dry extinguishing remedy.
The examples of Aromatic Hydrocarbons will include:
Benzene, Toluene and Xylene.
Hydrogen Sulphide and Carbon Monoxide.
Carbon Dioxide and Hydrogen Peroxide.
Propane, Butane and Pentane.
During inspection of a high pressure fuel pump for a medium speed diesel engine it is observed that the upper leading edge and the lower helical edge of the pump plunger have suffered from erosion damage. Select the correct action to take to remedy this from the options given.
Renew only the plunger if the barrel appears undamaged.
Renew the plunger and barrel insert as a pair.
Smooth away the damaged area with a grinder and polishing stone and refit it.
Replace the complete pump with a new or reconditioned spare.
Hot work is to be carried out close to a smoke detector in the engine room. What precautions should be taken?
Notify Deck Officer and Engineer Officer in charge. The loop for the smoke detector should be isolated while work is done and normal precautions for hot work taken including permit to work.
Disconnect or cover up the smoke detector.
No special precautions except for having a watch man and a fire extinguisher available.
Notify Deck Officer in charge that a fire alarm may occur.
What is the main difference between a stuffing box gland and a mechanical seal on a centrifugal pump?
If packing fails the pump can be kept running by tightening the glands, but if a mechanical seal fails it must be renewed to stop the leakage.
The sealing surface of a mechanical seal is usually parallel to the shaft, but sealing surface of a packed gland is perpendicular to the shaft.
Packed stuffing box glands are subject to wear but mechanical seals are not.
Packed stuffing box glands must be cooled by liquid, but mechanical seals do not require any cooling.
What is the emergency frequency of MF (Medium Frequency) radio?
2 617 Hz.
2 182 Hz.
1 616 Hz.
1 718 Hz.
If the flow of gas to shore reaches the maximum declared capacity whilst using the Vapour Emission Control System (VECS), the OOW should:
Say nothing and hope notices, so that loading is completed as soon as possible.
Reset the lifting pressure level on the Pressure/Vacuum valves to allow them to release more vapour to atmosphere.
Open the mast riser vents to relieve the excess pressure and bring the flow within the declared range.
Request the terminal to reduce the loading rate until the flow of gas to shore is controlled.
What measures should be taken when handling mail?
Open any mail that looks suspicious.
X-ray or scan parcels before opening them.
Wear rubber gloves and protective clothing when opening suspicious looking mail.
Tear open letters with your hands.
What method shall be used when hauling survivors out of the sea (state of survivors is critical)?
Using painter.
Using heaving line.
Using lifebuoy.
Using nets.
What is the signal actuated by a fire detection system?
A visual and audible alarm signal at the control panel.
An audible signal at the control panel.
A visual signal at the control panel.
An audible and visual signal consisting in 7 short signals followed by a long one.
What is the disadvantage of using chemicals on an oil-spill on the water?
The water gets a white colour, which makes it easy to detect the oil-spill.
It is difficult to apply chemicals if there is any wind.
The chemicals make it difficult to remove the oil from the water.
It is difficult to apply the chemicals if the oil drifts away from the ship’s side.
Which of the methods given in the options should be used to test a remote reading temperature gauge for the auxiliary boiler exhaust gas?
Check the resistance change in the sensor over a known temperature range against the resistance values in the product sheet.
Fit a spare temperature gauge and see if the reading are the same.
Place the sensor in a test tank of water fitted with a heater element and thermometer and check the temperature gauge at different temperatures.
Place the sensor in a test tank of oil fitted with a heater element and thermometer and check the temperature gauge at different temperatures.
Which of the following areas may be possible restricted areas? Review all answers.
The Bridge.
The Cargo control room.
All alternatives.
The Engine control room.
What would be the most probable cause of the exhaust gas temperature from one cylinder of a diesel engine being lower than normal?
The opening pressure for the injection valve for the cylinder is set too high.
There is air in the fuel oil system.
The camshaft chain is too slack.
The intake filter for turbo charger is partly fouled.
The use of combustible material is restricted in the accommodation spaces in order to:
Reduce cost of construction.
Prevent occurrence of fire and explosion.
Contain and suppress fire and explosion in the compartment of origin.
Make the ship light.
What kind of permits have to be obtained before starting hot work in tanks?
Hot work permit + Permit for entry.
Hot work permit.
Permit for entry.
Cold work permit.
What is the “International shore connection” used for?
To connect the ship fire main to the shore lines.
To connect the cargo hoses to the shore.
To connect the bunker hoses to the shore.
To connect the ship fresh water hoses to the shore.
Is it necessary to cool the samples taken from a diesel engine cooling water system before carrying out tests to determine the concentration of treatment chemicals?
No, the samples should be heated to approximately 95 °C.
Yes, the samples should be cooled to approximately 25 °C.
Yes, the samples should be cooled to approximately 50 °C.
No, the test should be carried out at system temperature.
The bones in the human body are connected to each other by:
Muscles.
Fibrous tissues.
Tendons.
Different type of joints.
What actions should the Officer of the Watch take when the ship’s steering gear fails?
All of the suggested answers.
Request the engine room to check the steering gear.
Call the Master and advise him of the situation.
Display the NUC signal and consider stopping the engines.
What would you do if you are told to operate a piece of mechanical equipment which you are not familiar with?
Seek advice from your superior before attempting to operate it.
Ensure that all safety guards and devices are disconnected.
Try and guess how the equipment should be operated.
Ignore the request to operate the equipment.
What are the lists called that give the position and task during a lifeboat drill for all persons on board the ship?
The Crew List.
The Duty List.
The Drill List.
The Muster List.
What are the lists called that give the position and task during a lifeboat drill for all persons on board the ship?
The Drill List.
The Duty List.
The Muster List.
The Crew List.
What is the correct understanding of the term “Lapse Rate” when used in Meteorology?
The rate of increase of the wind associated with a Tropical Revolving Storm.
The delay in temperature reduction associated with the wet bulb thermometer of a hygrometer.
The change in the temperature associated with the passing of the warm front of a frontal depression.
The change of the temperature in the atmosphere with height above sea level.
An important quantity which is useful in circuit analysis is known as conductance G (Siemens). Which of the formulas A to D expresses the conductance for this circuit?
G = 1/R.
G = 2R.
G = I/R.
G = R*V.
What is the minimum number of channels required for the portable two-way VHF’s for survival craft?
Channels 6, 13 & 16.
Channels 16 & 12.
Channel 16 only.
Channels 6, 12 & 16.
After checked for open airway, given the first two inflations and checked the pulse to make sure that the heart is beating, what is the rate of inflations given until natural breathing is restored?
12-16 times per minute.
10-12 times per minute.
25-27 times per minute.
Doesn’t matter how many times.
The responsibility for safety and security rests with everybody on board the vessel. General house-keeping rules should be followed. Which of the listed rules is the most important?
Always use gloves when using grinding machines.
Keep tools within easy reach during work.
Keep your working area clean and tidy.
Do not carry lighters or matches when working outdoors.
What is the capacity of the required portable fluid extinguishers?
Not more than 20 litres and not less than 12 litres.
Not more than 20 litres.
Not more than 13,5 litres and not less than 9 litres.
Not more than 10 litres.
Welding and burning are two operations which give the highest risk of a fire on board ship. Which of the following safety precautions may be regarded as the most important in order to minimise this particular risk?
The area where the welding is to take place and adjacent spaces to be cleaned and all unnecessary materials and objects to be removed.
Only holders of a welding certificate should be allowed to carry out welding or burning on board ships.
Only use electrodes from a well known manufacturer.
Electric welding plants should be controlled by a responsible engineer before use.
During an oil cargo discharging operation, the IG supply to the tanks fails. As an OOW you would:
Continue discharging with the cargo pumps running at minimum speed, and inform the engine room.
Slow down and relieve the vacuum by opening the tanks lids and inform the Chief Officer.
Activate the inert fans and blow fresh air into the cargo tanks, and inform the terminal authority.
Immediately stop the discharging and inform the Chief Officer.
You are carrying out a search in a smoke filled compartment wearing a breathing apparatus. At what stage should you start to make your way out of the compartment?
Wait until the breathing apparatus warning whistle sounds.
15 minutes after starting to use the set as this leaves you with 5 minutes air left.
Wait for the appropriate signal on your safety line as the personnel outside will be keeping a track of the time you have spent inside.
Regularly check your pressure gauge and note how much air you used to reach your work area. Start to return when you have this amount left plus a reasonable reserve.
During cargo or bunker operations, oil response equipment is to be:
In its store room.
Used elsewhere in the ship.
Ready for immediate use.
In the cargo pump room.
What will a cadet find in the maintenance manual?
A cadet will find a lubricating chart in the maintenance manual.
A cadet will find grease in the maintenance manual.
A cadet will find machinery spare parts in the maintenance manual.
A cadet will find grease nipples in the maintenance manual.
The insulation resistance (IR) to earth of a new galley hot-plate is measured to be 30 Mohm. When three identical hot-plates on the same supply are tested together their combined IR will be:
30 Mohm.
3 Mohm.
90 Mohm.
10 Mohm.
Which of these are indicators that an individual may be a drug smuggler?
The individual makes small local purchases.
The individual is disinterested in the ship’s cargo.
The individual wears bulky or out of season clothing.
The individual spends his or her free time hanging out with others.
Give the meaning of the following symbol:
Child’s lifejacket.
Lifejacket.
Muster station for unaccompanied minors (UM).
Immersion suit.
What signal, if any, is specified in SOLAS as the “Abandon ship” signal?
Six short blasts followed by one long blast.
The “Abandon ship” signal is not specified, only the general emergency alarm signal is stated.
Four long blasts.
Seven short blasts followed by one long blast.
When shutting down the flue gas plant, the last step that the operator shall carry out would be to:
Close the deck isolating valve.
Open ventilation valve to atmosphere.
Close the gas pressure control valve.
Shut down of inert gas blower.
Water is the extinguishing agent which is the most widely employed and its action as an extinguishing agent is due to a combination of the following phenomena:
Smothering and inhibition.
Cooling, smothering and dispersion.
Smothering and dispersion.
Cooling, inhibition and dispersion.
What do you call the method used for bone-soft part injuries?
ICE-method.
ABC-method.
REHAB-method.
First Aid-method.
Why should boiler sootblowers normally only be operated in the correct sequence?
To ensure soot is cleared progressively from the bottom tubes to the top and toward the boiler uptakes.
To minimise loss of steam pressure.
So that the operator does not forget which sootblowers have been used.
To avoid excess stress in the boiler.
With reference to the efficiency of cargo pumps on oil tankers, the abbreviation NPSH stands for:
Net Pressure Suction Head.
Necessary Pumping Suction Hazard.
Nominal Pressure Suction Head.
Natural Pumping Standard Height.
An engine room rating is assisting in the maintenance of some of the valves on the low pressure steam range. Which packing material, from the options given, would be the best choice for repacking the gland of a low pressure steam valve?
Graphite fibre packing.
PTFE rope packing.
Lead covered cotton packing.
Greasy cotton packing.
What would be the effects of a ship passing into shallow waters?
The vessel has a tendency to swing to port with a single fixed-pitch right-hand turning propeller.
The speed is not affected, but more rudder is required to steer the ship.
There is no noticeable difference in performance of the ship.
The ship is less responsive to both rudder and propeller.
The small amounts of cargo found in the cargo tanks before loading is referred to as OBQ, which means:
OBQ (On Board Quantity).
OPB (Observed Preliminary Volume).
TSV (Total Surveyed Volume).
ROB (Remaining On Board).
The purpose of having corrugations in the bulkheads of cargo tanks of an oil tanker is to:
Provide strength, but with clean and clear surfaces within the tank.
To assist in the drainage of the oil by funneling the oil to the suction well.
Reduce the effects of Free Surface within the vessel.
Provide additional resistance to shear forces and bending moments.
How many rocket parachute flares are carried in each liferaft with SOLAS B pack?
6.
2.
12.
Nil.
When shutting down the flue gas plant, the last step that the operator shall carry out would be to:
Shut down of inert gas blower.
Close the gas pressure control valve.
Close the deck isolating valve.
Open ventilation valve to atmosphere.
Unfortunately an insect has become lodged in the ear. How to remove the insect?
By using rubber vacuum pump and suck the foreign body out.
Hold one hand across your nose and blow hard. Since the nose-channel is closed, the air will escape through the ears instead. And so will the foreign body.
Gently flood the casualty’s ear with terpid water so that the insect will float out.
By using a Q-tip and carefully try to get the insect out.
What could be the cause of a refrigeration compressor running continuously even though normal temperatures for the cold rooms have been reached?
Low-pressure cut-out is stuck in closed position.
The differential pressure switch for the lubricating oil pressure cut-out is stuck in the closed position.
High-pressure cut-out is stuck in open position.
Solenoid valve before the expansion valve stuck in closed position.
The current test includes Seagull CES questions on the topic of «Engine, Operational, Medium Speed». These questions are designed to verify the competence of specialists who are responsible for preventing accidents related to transport safety and can also be used for self-assessment.
The «Medium Speed» subject provides both theoretical and practical knowledge essential for advanced training on any type of vessel. Mastery of this information is a clear indicator of an employee’s competence in their role on board. A professional responsible for maintaining a medium-speed engine on a vessel has a range of crucial duties to ensure the ship’s safety and efficiency. This includes conducting regular technical maintenance, such as inspections, cleaning, replacing components, and lubricating bearings. Additionally, they monitor and adjust operational parameters like temperature, pressure, and fuel consumption to meet established standards, thereby ensuring optimal engine performance.
- Test type: STCW.
- Version: 5.2.7, 6.0.
- Department: Engine.
- Level: Operational.
- Propulsion: Medium Speed.
Отзывы могут оставлять только моряки. Чтобы оставить отзыв, зайдите на сайт под учетной записью моряка.
Оставьте первый отзыв о данном онлайн-тесте!